KINGMAX Introduces the High Performance SATA III Client Pro SSD in the Market
KINGMAX is the renowned memory and flash module industry, has launched its high performance SATA III Client Pro SSD – SMU32 and SMU35. These two brand will be the main highlight for their new release of SSD.
Read/Write Speed : up to 550MB/s, 520MB/s
Random Write Speed : 4KB up to 85,000 IOPS.
*Results vary on condition and usage.
This is a perfect storage and multitasking experience that has speed, endurance, capacity and superior technology based on Sandforce controller and latest firmware. SMU32 and SMU35 support NCQ and TRIM command to optimize performance. DuraWrite , powerful wear leveling algorithm and intelligent block management also enhance lifetime.
Data is safeguarded by S.M.A.R.T function
Protected by high level of Error Correction Code – 55 bit BCH ECC – avoiding worries from potentially flash block failures.
Shock and Vibration Resistant, Noiseless operating without audible sounds
Lower power consumption
3 Years Warranty
Both product offers various capacities of 60GB/120GB/240GB/480GB, which is a good product for system disk, multitasking media, graphics and video editing, gaming and typical file storage for faster and reliable transfers.
What’s the difference between the two product (SMU32 and SMU35); for SMU32 is a perfect replacement on your Laptop/Netbook HDD and if you’re going to used it on Desktop/PC, then go forth on SMU35 which has a Desktop Bracket Kits perfectly fits in standard 3.5 drive bays.
Technical Specifications of KINGMAX SATA III Client Pro SSD:
| Physical | |||
| Interface | SATA III 6GB/s | ||
| Form Factor | 2.5” | ||
| Capacity | 60/120/240/480GB | ||
| Dimension | 100.0mm(L)x69.85mm(W)x7.0mm(T) | ||
| Weight | 71g (max.) | ||
| Environmental | |||
| Operating Temp. | 0~70℃ | ||
| Storage Temp. | -40~85℃ | ||
| Shock Resistance | 1500G/ 1.0ms | ||
| Performance | |||
| Sequential Read (ATTO1) | Up to 550MB/s | ||
| Sequential Write (ATTO1) | Up to 520MB/s | ||
| Random Write (IO-Meter2) | 60/120/240GB up to | ||
| 85,000 IOPS | |||
| Performance Optimization | TRIM/ NCQ support | ||
| Power Consumption | |||
| Voltage | DC 5V +/-5% | ||
| Active | 60GB: 1.5W(Typ.) 120/ | ||
| 240/480GB: 2.8W(Typ.) | |||
| Idle | 60GB~240GB: 0.5W(Typ.) | ||
| 480GB: 1.0W(Typ.) | |||
| Reliability | |||
| Wear-leveling | Strongly Wear-leveling | ||
| MTBF | 1.2 million hours | ||
| (Mean Time Before Failure) | |||
| Data Protection | 55 bit BCH ECC | ||
| Product Health Monitoring | S.M.A.R.T | ||
| Data Retention | 10 years | ||
| Warranty | 3 years | ||
| Compliance | CE, FCC, BSMI, RoHs | ||
Learn more about KINGMAX – Solid State Drive – 2.5” SATA III SSD – SMU32 Client Pro click here
Learn more about KINGMAX – Solid State Drive – 2.5” SATA III SSD – SMU35 Client Pro click here
(Note: KINGMAX (SSD – SMU32 and SMU35) Logo/Images/Pictures has respective copyright. I used it for demonstration purpose only.)
Related Links / Articles / Entries / References / Sources :
KINGMAX Official Site
KINGMAX – SATA III Client Pro SSD – SMU32 – Official Site
KINGMAX – SATA III Client Pro SSD – SMU35 – Official Site
